The independent appliance repair shop across the West Coast
Oven Repair in Clovis — Book a Visit Today
We repair ovens that preheat to 350 and never brown the roast. An oven that lies about temperature usually has a drifting sensor, a failing bake element, or relays on the control board sticking. Gas ovens weak on heat often need an igniter that no longer pulls enough current. We put a meter on the sensor and a thermocouple in the cavity to see the real numbers. Clovis kitchens with older wall units are worth testing before anyone talks replacement. Skip the self-clean cycle for now. Call us or send the quote form.
Call (888) 352-5066- You reach a person, not a menu
- Open every day
- The quote comes first, in writing
Taking calls until 5:00 PM PT
Common oven faults in Clovis homes
- "It heats, but everything burns on the bottom." Failed temperature sensor, a miscalibrated control, or a dead broil element forcing all the heat from below.
- "I smell gas and it clicks forever before lighting." A weak igniter that never draws enough current to open the safety valve. Stop using it and call.
- "The display shows F3 and won't clear." Error code from the control board or the sensor circuit, often an open probe wire.
- "Door won't shut flush and the kitchen gets hot." Worn hinges, a stretched gasket, or a warped inner panel letting heat out.
- "Self-clean ran, and now nothing works at all." Blown thermal fuse or a tripped limit switch after the high-heat cycle, sometimes with control damage too.
Clovis coverage
We cover Clovis 93611, 93612 and 93619, plus nearby Fresno, Sanger, and the Old Town and Loma Vista neighborhoods.
Other repairs we do in Clovis
- Refrigerator Repair
- Washer Repair
- Dryer Repair
- Dryer Vent Cleaning & Repair
- Dishwasher Repair
- Stove & Range Repair
Oven Repair service hub → · Every appliance we fix in Clovis →
How an independent local shop compares in Clovis
| LA Metro Appliance Repair | Big-box repair chains | Handyman listings | |
|---|---|---|---|
| Quote in writing before a wrench comes out | ✓ | ✕ | ✕ |
| A real person answers, 7 days a week | ✓ | ✕ | ✓ |
| Every major brand, gas or electric | ✓ | ✓ | ✕ |
| No manufacturer targets to hit | ✓ | ✕ | ✓ |
| Techs who know the local housing | ✓ | ✕ | ✓ |
What homeowners say after the visit
“He explained every step before touching a screw. Quote on paper first, then the work.”
Luis G.Mesa, AZ“Our oven was running forty degrees cold for months. One sensor later, cookies come out right again.”
Renee W.Anaheim, CA“No upsell talk at all. He fixed the drain pump and pointed out a hose I should watch, that was it.”
Jeff D.Stockton, CAOven Repair in Clovis — quick answers
Is it safe to use the cooktop if the oven is broken?
On an electric range, usually yes, because the surface elements run on a separate circuit. With gas, if you smell gas at any point, shut off the supply, ventilate, and call us before using anything.
Why does my oven take so long to preheat now?
On gas, a weakening igniter is the common culprit. On electric, a partly failed element or a drifting temperature sensor stretches preheat out. Both are testable. A tech reads actual current and resistance instead of guessing.
Can you work on a wall oven built into cabinetry?
Yes. Wall units come out on their mounting screws for access. Tight LA condo installs sometimes need trim removed first, so tell us the layout when you call us and we'll bring the right hands and tools.
My oven runs hot compared to a thermometer. Fixable?
Often. Many controls allow a calibration offset. If the drift is large or jumps around, the temperature sensor is probably failing and gets replaced. We check with our own probe before and after.
How soon can someone get to my Clovis home?
Most Clovis calls get a same-week window, and often next-day. We group appointments by area, so mornings tend to run Clovis and Old Town while afternoons push toward Fresno and Sanger. Tell us your closest cross street when you call us and we'll match you to the nearest opening.
How it works
- Step 1
Tell us the symptom
Call us or type it into the form. Leaking, buzzing, not draining, a blinking code. We ask a few questions and write down your brand and model so the van gets loaded right.
- Step 2
We pick a window
We build arrival windows around real traffic instead of wishful thinking. Tell us about gate codes, HOA elevator hours, or a tight parking situation, and we plan the route around it.
- Step 3
Diagnose, then repair
The tech opens the machine, tests the part that failed, and tells you what he found in plain words. Nothing gets ordered or replaced until you approve it. Common parts ride along in the van.
- A real person answers
- Open 7 days
- Written quote before work starts
Why homeowners call us
- Stacked units and tight closetsApartment and condo laundry usually sits in a closet with two inches of clearance. We pull, service, and reset stacked washer-dryer sets without wrecking the drywall or the drain pan underneath.
- Coastal air, valley heatNear the water, salt air rusts hinges and control boards. Inland, heat cooks compressors and dryer vents. So we check for the wear your zip code causes, not only the part you called about.
- HOA-aware visitsBuildings have rules: loading dock windows, service elevators, insurance paperwork, quiet hours. We work inside those limits so your manager stays calm and the repair still happens on schedule.
- Four states, one callCalifornia, Nevada, Arizona, and Oregon. Same intake, same questions, same plain talk about the repair. One number to remember when the second home or the rental unit acts up.
- All major brands, gas & electricEvery major appliance brand, gas and electric, handled by an independent shop.
- Straight answersIf replacing beats repairing, you hear it from us first.
Oven Repair in Clovis
The longer it sits broken, the more it takes from you
Describe the fault, approve the written quote, get it fixed. Starting takes about a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →