Ice Maker Repair — Book a Visit Today
Ice makers quit in small stages. The cubes shrink. Then they clump. Then the bin sits empty while the freezer hums along fine. Usual suspects: a frozen fill tube, a tired water inlet valve, a worn ejector motor or gearcase, a clogged filter, or a thermostat that never tells the harvest cycle to start. Coastal humidity and Valley heat both push these parts harder than the spec sheet expects. Our visit starts with a water test, then a forced harvest cycle, then a look at the line behind the unit. We work on freestanding, built-in, under-counter, and stacked-kitchen setups, and we know how condo buildings handle shutoffs. Call us and tell us what the ice looks like.
- Real person answers
- Open 7 days
- Written quotes
- A real person answers
- Open 7 days
- Written quote before work starts
Taking calls until 5:00 PM PT
The ice maker symptoms we hear most
- "No ice at all, but water still works" Ejector motor, module, or a failed thermostat in the icemaker head
- "The cubes are hollow and tiny" Low water fill — restricted inlet valve, clogged filter, or kinked supply line
- "Everything froze into one big block" Slow leak at the fill tube or valve seeping between cycles
- "Ice tastes like the freezer smells" Old filter, stale cubes sitting too long, or an open water line absorbing odors
- "Water puddles under the fridge after it drops ice" Overfill, cracked fill cup, or a misaligned bin and door gasket letting warm air in
Safe things to check first
Worth a look before you call — sometimes it saves you the visit.
- 1Look behind the unit and make sure the saddle valve or shutoff is fully open with no sharp bend in the copper or plastic line.
- 2Check the freezer temperature — most ice makers stall above about 10°F, so a warm freezer explains a slow bin.
- 3Confirm the wire bail arm or shutoff switch isn't propped up by a bag of frozen food.
- 4Dump the bin, note the time, and see whether any fresh cubes drop within a few hours so you can tell us the real rate.
How it works
- Step 1
Tell us the symptom
You call us or type it into the form. Leaking, buzzing, not draining, blinking code. We ask a few questions and note your brand and model so the van is loaded right.
- Step 2
We pick a window
Arrival windows get built around real traffic, not wishful thinking. Tell us about gate codes, HOA elevator hours, or a tight parking situation and we plan the route around it.
- Step 3
Diagnose, then repair
Our tech opens the machine, tests the part that failed, and explains what he found in plain words. You approve the work before anything gets ordered or replaced. Common parts ride along.
- A real person answers
- Open 7 days
- Written quote before work starts
Guides & troubleshooting
Ice Maker Repair — quick answers
Why did my ice maker stop after I changed the water filter?
Air gets trapped in the line during a filter swap. Run several quarts of water through the dispenser to purge it. If the filter is aftermarket or seated crooked, flow may stay too low for a full fill. Call us if cubes stay hollow.
Can you fix the ice maker without replacing the whole refrigerator?
Usually yes. Most failures are one part: inlet valve, module, motor, thermostat, or fill tube heater. We diagnose the specific point of failure and repair that assembly rather than swapping everything behind it.
My under-counter ice machine is in a condo. Do you need building access?
Sometimes. Under-counter units share a drain and a supply line that may pass through a wall or into a common chase. Let your HOA know we're coming. Tell us the building rules when you call us and we'll plan the window.
How long does a typical ice maker visit take?
Diagnosis runs quick — a water test and a forced harvest cycle tell us most of it. Repairs vary with the part. Once a new icemaker is installed, expect a few hours before the first full batch drops.
Is a leaking ice maker urgent?
Treat it as urgent. Water that seeps into the freezer floor or down the cabinet side can reach flooring and subfloor. Shut the supply valve, dry what you can reach, and get it looked at before the ice bridge grows.
Do you service built-in and stacked-kitchen refrigerators?
We do. Built-ins need careful pull-out so cabinet trim and flooring stay intact. Apartment stacked layouts often mean tight clearance around a laundry unit. Send us a photo of the space and we'll bring the right tools.
How it works
- Step 1
Tell us the symptom
You call us or type it into the form. Leaking, buzzing, not draining, blinking code. We ask a few questions and note your brand and model so the van is loaded right.
- Step 2
We pick a window
Arrival windows get built around real traffic, not wishful thinking. Tell us about gate codes, HOA elevator hours, or a tight parking situation and we plan the route around it.
- Step 3
Diagnose, then repair
Our tech opens the machine, tests the part that failed, and explains what he found in plain words. You approve the work before anything gets ordered or replaced. Common parts ride along.
- A real person answers
- Open 7 days
- Written quote before work starts
Questions worth asking any repair company
Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.
- 1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
- 2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
- 3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
- 4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
- 5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.
Why homeowners call us
- Stacked units and tight closetsApartment and condo laundry lives in a closet with two inches of clearance. We pull, service, and reset stacked washer-dryer sets without wrecking drywall or the drain pan underneath.
- Coastal air, valley heatSalt air rusts hinges and control boards near the water. Inland heat cooks compressors and dryer vents. We check for the wear your zip code causes, not just the part you called about.
- HOA-aware visitsBuildings have rules. Loading dock windows, service elevators, insurance paperwork, quiet hours. We work inside those limits so your manager stays calm and the repair still happens on schedule.
- Four states, one callCalifornia, Nevada, Arizona, and Oregon. Same intake, same questions, same plain talk about the repair. One number to remember when the second home or the rental unit acts up.
- All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
- Straight answersIf it isn't worth repairing, we'll say so — often on the phone.
Ice Maker Repair
Small faults become big ones on a schedule of their own
Describe the symptoms and we'll book the visit — takes about a minute.
- A real person answers
- Open 7 days
- Written quotes
- All major brands
- Gas & electric
Rather not call? Get a free quote →